sounds like a …
sounds like a timing issue it could be the carb or it could have a worn cam turn it counterclock wise to advance timing or clock wise to lower the timing untill it runs better

Check that your …
Check that your plug wires arent on the exhuast and burnin up.

hey i have a 1978 …
hey i have a 1978 chevy k10 and it has the wrong harmonic balncer so check is urs is the right one for the motor

that is soo true
that is soo true

ford sucks, id …
ford sucks, id rather push a chevy than drive a ford….

i know how to fix …
i know how to fix your problem. Its simple, buy a ford.

you have a SEVERE …
you have a SEVERE problem Off TOO MUCH ADVANCE
loosen off your dizzy bolt with it rtunning with some throttel turn it ClockWise OR Counter Clockwise UNTILL it runs ok without backfiring in the carb

I’m having the same …
I’m having the same problem with my ’73 ,I’ve tried for weeks to fix it with no luck.Can anyone help?Check my vid response.

have you got the …
have you got the firing order correct? if not, the firing order is on the intake manifold

get a timing light. …
get a timing light…
wow.

and you dont need a new car, new cars suck. old ones are way easier to work on.

i got my 1984 chevy 2.8 runnin without a tic or a click. perfect.

just get a new …
just get a new ing car and i mean new

jajaja im having …
jajaja im having the same problem with my 1985 chevy c-10…The timing is was off..

timing is waaaay …
timing is waaaay off, check the chain if thats fine then it could be the distributor gear is dinged up

your timing is WAY …
your timing is WAY off! I would imagine since its popping out the carb the timing is either to far foward or your timing chain has jumped a few teeth. Popping out of the carb a SURE sign the timing is off.

Check your …
Check your points.Just a thought,hope it helps.

If you have another …
If you have another carburetor, stick it on there and see what happens.

timing try top dead …
timing try top dead center and do the distributor rewire it and it might be burnin rich back firin .

Try running diesel
Try running diesel

I know i posted …
I know i posted once before, But one more thing you might want to check i seen you had yours wires zip tied togeter well sometimes that will cause them to miss fire.

sounds like firing …
sounds like firing order or you need to reset the timing put number one top dead and reset the dist. also check to make sure your wires arent burtnt or cracked i have a 69 truck with a 383 did the same started up put give it a lil and it would pop check timing and all wires

eh……what??
eh……what??

Sounds like timing …
Sounds like timing could be way to far advanced or wires crossed. NateDogg: yes the firing order can be off when me an my friend put a 383 in his 95 silvy, he had 5 and 7 crossed it ran and would go down the road, but it ran like

i know its your …
i know its your muffler bearing because i had a teeruck dust like yurn its a 66 ford right if dat dusent werk try inhiberter relay it ill make em pop tu

my 87 c10 did this …
my 87 c10 did this exact same thing. i had a bent pushrod which threw everything out of order. thats what it sounds like to me

after that take ur …
after that take ur fuel line off (don’t want the truck to start during this) and put it in a catch pan or something to that affect take ur valve covers off and let one of ur friends just tap the ignition a couple of times if some of the rockers are moving more then others you could have bent pushrods or a bad cam or some really really bad valve lash lol just go through this and see if that doesn’t help