i have it completley loose but theres not enough room to lift it up out of the truck and i was wondering if theres something else im supposed to take off like the guide rods or something?
there should be three bolts that hold the steering box to the frame and then disconnect the steering shaft and then the Pittman arm,and the steering box should come out from under the truck….if you mean the power steering pump located on the left front side of the motor first losten the adjusting bolts should have two one by the top other on the side and remove the belt then you should have two lines going to the steering box these will have to be removed also.then there should be a third nut located behind the pump this has too come off also,so you should have two bolts and nut two lines and a belt to remove…and should come straight up from the motor…..
No related posts.
4 Users Responded in " i need complete instructions on how to replace the power steering gear box on a 79' chevy truck? "
there should be three bolts that hold the steering box to the frame and then disconnect the steering shaft and then the Pittman arm,and the steering box should come out from under the truck….if you mean the power steering pump located on the left front side of the motor first losten the adjusting bolts should have two one by the top other on the side and remove the belt then you should have two lines going to the steering box these will have to be removed also.then there should be a third nut located behind the pump this has too come off also,so you should have two bolts and nut two lines and a belt to remove…and should come straight up from the motor…..
References :
i'd recommend searching google, ebay, craigslist,
References :
Go to; http://www.bowtieguy.proboards33.com/index.cgi? it is all about 1973 thru 1987 Chevy pickups. You can get any questions or answers there.
References :
http://www.bowtieguy.proboards33.com/index.cgi?
first place to start is get a hanesservice manul
References :
Leave A Reply Here