Comments on: i need complete instructions on how to replace the power steering gear box on a 79' chevy truck?

By: michael l

michael l — Fri, 19 Dec 2008 15:13:59 +0000

first place to start is get a hanesservice manul
References :

By: bigtendude

bigtendude — Fri, 19 Dec 2008 14:36:59 +0000

Go to; http://www.bowtieguy.proboards33.com/index.cgi? it is all about 1973 thru 1987 Chevy pickups. You can get any questions or answers there.
References :
http://www.bowtieguy.proboards33.com/index.cgi?

By: Hall + Oates

Hall + Oates — Fri, 19 Dec 2008 13:54:59 +0000

i'd recommend searching google, ebay, craigslist,
References :

By: KAM

KAM — Fri, 19 Dec 2008 13:07:59 +0000

there should be three bolts that hold the steering box to the frame and then disconnect the steering shaft and then the Pittman arm,and the steering box should come out from under the truck….if you mean the power steering pump located on the left front side of the motor first losten the adjusting bolts should have two one by the top other on the side and remove the belt then you should have two lines going to the steering box these will have to be removed also.then there should be a third nut located behind the pump this has too come off also,so you should have two bolts and nut two lines and a belt to remove…and should come straight up from the motor…..
References :